Precise Know How of Viking Stove Igniter Problems

In most of the cases it is difficult to ascertain what is causing trouble with your Viking stove ignition by yourself, but here is a complete guide on how to get started with finding the issue that has been hampering you from putting your favorite continental cuisine on the platter for your family this evening.

It is easy to follow the steps mentioned below to know how to solve Viking stove igniter problems by yourself and if not then hold your patience and calm, as the preeminent Viking technicians’ expertise is minutes away from being at your assistance.

STEP 1: OPEN UP THE STOVE TO ACCESS THE IGNITER

This step shall require you to unplug the stove from the wall and lift up the hood of the stove. This is a precautionary measure as it will help you from accidentally lighting up the stove. It is now time to prop up the lid on the hinges until the hood is released.

STEP 2: ENSURING THAT THE IGNITER IS CLEAN

It is important to make sure that the igniter is clean, as the food that is being cooked might clog the igniter, thus causing problems. A toothbrush or a steel wool pad is a great way of making sure that all the contaminated dirt and grease is scrubbed away, however try to not use water for scrubbing as it may seriously damage the electrode and prevent it from working.

STEP 3: CHECK IF THE SWITCH IS WORKING PROPERLY

The next step requires you to check whether or not the switch behind the gas control knobs at the front of the stove top is working properly. It is pretty simple, all you need to do is pull out the knob in front of the stove to spot that faulty igniter, pull out the switch and loosen the screw holding the wire of the igniter in the place. Insert the wire into a new switch and test.

STEP 4: CALL UPON THE EXPERTS

However, if despite all your attempts that Viking stove igniter problem persists, all you need to do is call upon the certified technicians who provide Viking stove repair services at your doorstep in no time, as it seems that the nasty igniter of yours might be in need of a replacement and cleansing which is beyond your reach.

Leave a Reply

Your email address will not be published.